 |
Materials
|
Equipment
|
|
IGI Parafflex 4636A® (AstorLite J50®) Candle Wax |
Double Boiler |
|
Tea Cups for Candles |
Thermometer
for Candle Making |
|
Fragrance Oil/Scent |
Pouring Pot |
|
Liquid Dye |
Scale |
|
Wick or Wicks |
Oven |
|
Weigh Wax: |
- Weigh the amount of IGI Parafflex 4636A® (AstorLite J50®) candle wax needed for your project.
- You will need to determine how much wax your tea cups will hold.
|
|
Melt Wax: |
- Heat IGI Parafflex 4636A® (AstorLite J50®) candle wax to between 145°F-170°F using a
double-boiler system.
- Use a
candle thermometer to check temperature.
|
|
Pre-Heat: |
- Pre-Heat
Tea Cups in oven at
140°F or at lowest setting.
|
|
Add Scent: |
- Add
up to 4 - 6% fragrance by melted wax weight not to exceed 1 ounce of scent to 1 pound of wax.
|
|
Add Dye: |
- Add dye until desired color is
achieved.
- You
can test color by dropping a few drops of wax onto a piece of white
paper.
|
|
Stir
well: |
- Stir thoroughly to
incorporate scent and dye.
|
|
Pour Wax: |
- Lower the
pouring temperature to between 145°F - 160°F.
- Pour
into
Tea Cups that have been preheated to between 130°F - 140°F. This
allows for better side adhesion.
|
|
Insert Wick: |
- Once the candle wax has solidified
about ¼ inch at bottom place the appropriate wick in the
Tea Cups.
|
|
Cooling: |
- Allow to cool as slowly
as possible.
- Do not
place in a water bath or refrigerator to accelerate the cooling process.
|
|
Trim Wick: |
-
When the candle has completely cooled trim wick.
|
|
Never melt wax on a gas
stove, it has a Flash Point & is Flammable.
Never leave wax
unattended. |
|
Note:
Tri-State Candlemaking Supplies shall not be held responsible for
products created by you from our supplies. You alone are
responsible for product.
We
strongly recommend thorough recipe testing! |
print page
tell
a friend
